wakeonlan 配置
windows上的配置没有什么多说的, 设备管理器, 找到需要唤醒的网卡, 在power部分设置可以唤醒,在detail部分确认即可.
Go to Device Manager( in System) -> Select your network adapter and click right button -> Select Properties -> >Click Allow this device to wake the computer and Only allow a magic packet to wake the computer.
防火墙无需额外配置.
BIOS记得在power部分确认允许唤醒.
核心tricky的地方在于,就算设置了这么多, 依旧只能在Windows选择sleep的时候唤醒, shutdown之后是不行的.
原因在于fastboot, 关掉之后就可以了.
参考:
What I've checked was these: -Windows LAN adapters settings: All OK with all Magic Packets checked, and power saving unchecked. -Windows Power Saving settings: Full Performance (LAN/PCI/Related goes to standby) -BIOS settings: EuP Disabled, PCIE Wake Enabled
What I've found: -Normal Windows Shutdown: When performing a normal windows shutdown from "Shutdown" button, LAN card turns >completely off (stops blinking/reporting to router) -PC Monitor App: When sending from my phone the shutdown command from this app. the PC turns off the same way than >pressing the button BUT LAN card keeps alive (blinking and reporting to router), allowing me to wake up from my >network or through internet.
So it seems the shutdown button has some different command that kills my card when I press it to turn of my PC.
UPDATE: Think I've found it... is because Windows "Fast Boot" - http://support.microsoft.com/kb/2776718/en-us